HTTPS REQUIRED
This page is opened from a local
file:// URL. Browsers block microphone access on local files — host via HTTPS (e.g., Netlify) or http://localhost.
PedalScope
Guitar Pedal Oscilloscope & Audio Probe
UNCALIBRATED
IDLE
1.0 ms/div
0.20 V/div
ADC CLIP! Lower Mic Gain
Tap "Start Scope" to begin signal tracing
VPP
0.000 V
VRMS
0.000 V
FREQUENCY
--- Hz
DMM CAL
1-Second Multimeter Loopback Calibration
- Set your device volume to MAX (100%) with Scope running (400 Hz test tone active).
- Measure AC Vrms at the soundcard output with your multimeter.
- Enter the reading below, hold your probe tips to the output, and tap Calibrate Scope (1s Avg).
Vrms
Sampling probe for 1.0s... Hold steady!
0%
Scale Factor: 14.500
1.0 ms/div
0.20 V/div
0.00 V
50%
100% (Uncalibrated)